Latest threads in Embedded Programmingshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
DMA On LPC2468
Hi, I am trying to configure DMA controller on LPC2468 .I got the sample code on NXP website. It is transfering data from memory to memory .This memory is internal USB SRAM. But not work on simulator...
1
|
14 years ago
|
1 | |
|
|
Problem with SIMCOM 300 Module
Hi, 1.How to IGNITE SIMCOM 300 Module with the help Hardware Only. 2.SIMCOM300 Module work well when pwrkey is always ground this is correct method or not, this procedure may affect module or not any...
1
|
14 years ago
|
1 | |
|
|
LowCost ARM setup with S3C2440 ARM9 Board
i want to build a low cost ARM based setup for learning of linux drivers and board level porting objectives : 1)bootloader functionality 2)bare board porting of linux 3)linux boot up in embedded...
1
|
14 years ago
|
1 | |
|
|
Multiple Interrupt handling in XPS 8.2i
Iam using XPS 8.2i.I have built a custom peripheral and attached it to MicroBlaze (v 5.0) via OPB peripheral generates the two interrupts pins are input to the interrupt controller INTC (1.00 c)....
—
|
14 years ago
|
— | |
|
|
USB Microcontroller Question
I am just getting up to speed on using USB in an embedded environment. What I am wanting to do is to use one of the available microcontrollers (AVR,PIC,etc) in a USB HOST mode. In particular, I desire...
9
|
14 years ago
|
9 | |
|
|
Bluetooth audio
Does anyone have experience with Bluetooth audio modules? If I want to push audio from an embedded device to a Bluetooth headset, is it as easy as hooking up a BT module to a microcontroller and...
2
|
14 years ago
|
2 | |
|
|
Engine On/Off Indication From Lead Acid Battery
I'm working on a system using a PIC24FJ256GB106. One task it will be doing is monitoring the battery level of an industrial engine that charges one 12V or two 12V(24V) batteries with an alternator....
11
|
14 years ago
|
11 | |
|
|
Need ARM with 485, digital counters and analog I/O
I am looking for a new embedded computer that has an ARM processor or equivalent, 64MB of Flash, 128MB ram, two 485 ports, at least 2 digital counters, at least 8 analog 4-20ma connections and support...
1
|
14 years ago
|
1 | |
|
|
GSM module prices in bulk
We are searching for best price for GSM module component in quantities of 1000, 10000 and 100000 Can anyone suggest the sourcing contacts who can give us the best possible price. We are looking for...
—
|
14 years ago
|
— | |
|
|
IC-86 asm files
Hi, I am looking for some examples of files written in assembly for the Intel IC-86 compiler. The contents is indifferent, i search more the frames, directives and the syntax. Regards Jens
1
|
14 years ago
|
1 | |
|
|
Info From A Lead Acid Battery On An Engine?
I am developing a system that is powered from a 12V or 24V lead acid battery configuration on an industrial engine. These are the same lead acid batteries used in vehicles. The batteries or battery...
14
|
14 years ago
|
14 | |
|
|
Debugging TMS320, Step 1
I maintain the code for a controller based on the TMS320R2811. My system uses the boot loader to download the execuable code from a host app, so I need to know how to set breakpoints after the...
8
|
14 years ago
|
8 | |
|
|
GCJ (
Is it possibly to run java programs compiled with GCJ on LPC3250? Are there other java compilers to LPC3250?
—
|
14 years ago
|
— | |
|
|
ANNC: Parallel flash programming using boundary-scan
Hi, For those who interested in programming of parallel NOR flash memories via JTAG/boundary-scan, please have a look at our TopJTAG Flash Programmer software. The benefit of using boundary-scan to...
—
|
14 years ago
|
— | |
|
|
Tiered Firmware Features
I posted this earlier, but I believe it may have been discarded due to the subject heading. Several key words in it could have confused an automated script to discard it as junk. Crossing my fingers...
3
|
14 years ago
|
3 |