Latest threads in Embedded Programmingshow only best voted threads

Subject Author Posted Replies
 
USB transfer for DE2 board
hi, I'm modifying the coding from DE2 board CD -> DE2_demonstrations -> DE2_NIOS_DEVICE_LED. For the firmware of device controller for ISP1362 chip, there got six related coding: MAINLOOP.C, CHAP_9.C,...
 
I want to do Ethernet interface using FPGA DE0 Board
hello every one I was searching for the ability to design Ethernet interface with TCP/IP stack using Altera FPGA board DE0 ,and I really want to know if this is possible and what additional hardware...
 
Router/packet classifier hardware design
I am investigating possible hardware implementation of a router/packet classifier in ASIC/FPGA. Where can I find the relevant information to start with. --------------------------------------- Posted...
1
1
 
sFPDP : Data frame with CRC and no data
hi all, I am involved in a project for validating the sFPDP core. My question is : In case the CRC feature is enabled for sFPDP frames, and if a data frame is to be transmitted with 0 bytes (Lets say...
 
magnification re-work station
Anyone have a good source for scopes/magnifying, solder/rework equipment? Thinking about a little upgrading as parts get smaller. what are you guys using?
8
8
 
SQA
Hi all, I have an interview for an SQA embedded testing position. What are the things I need to brush-up or learn(?!). Thanks.
 
UK - Technical Workshops - Device Driver Development & SMP May 6th and 11th
Hi, just a quick update on this event. It's shaping up really well and now has much more industry support. We now have 6 half-day workshops, 8 technical presentations and over 30 vendors exhibiting....
 
An 80 port USB Board
An 80 port USB Board: |en&sl=ja&tl=en&u= Unfortunately it looks like it is just for power, so I wonder if there is a call for such a device. Was interesting enough to point out, but who could really...
12
12
 
Yet another SDRAM init request - MT48LC4M32B2 on MCF5329
Sorry guys - I know this an old subject but I am having problems and need your help. MCF5329 Coldfire processor (80Mhz) interfacing to MT48LC4M32B2 SDRAM. New design loosely based on the EVB...
 
Happy uController Forum
'A Microcontroller Discussion Board', at , appears to has been around for a little over 2-years, and has built a small, yet growing core of friendly, occasional contributors. The forum is sufficiently...
3
3
 
max number of led displays that could be multiplexed
I've got eight 7-segment displays. I know I've multiplex four at once but eight seems like a lot. It'd be slick to need just 16 pins. Can it be done? --------------------------------------- Posted...
6
6
 
RTOS stack overflow
Dear all, I am testing my own kernel for MSP430. I am measuring highest frequency for square signal that MSP430 with my kernel can repeat on its output. Square signal is connected to one of the...
17
17
 
ARM966E-S
Hi all, Sorry about my newbe question, but I'm lost trying to figure out how to do that.... I'm expert in ARM7 design but aways using comential IDEs (not so expert). Now I'm working in a new project...
6
6
 
ElektronikLaden compod serial protocol
Hi, Where can i found the compod12 serial protocol documentation ? Where can i donwload it ? Thanks Olivier
2
2
 
usb transfer between PC and de2 board
HI everyone, I'm trying to send 16 byte data block from PC to DE2 board and then the DE2 board will transfer back the data to PC using bulk transfer.(working environment : window Xp) For the firmware...
5
5