ANN: Updated Models & Schematics on My Website

I have updated my Device Models & Subcircuits page. Comments invited. I welcome suggestions of models you'd like to see created.

With years of benign neglect, I've accumulated more than 600 schematics on my S.E.D/Schematics page. So I'm busy indexing everything... after two days of work I'm just up to "H" :-(

I'm also coalescing topics, so that sequential improvements, as discussions of a problem evolved, will be combined and a descriptive cover added where appropriate. Again, comments welcome.

Where possible, graphics from the OP's problem statement will be added.

The names of OP's proven to be assholes will be rendered anonymous... that is their names will be replaced with "some asshole" >:-}

...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson
Loading thread data ...

August 31...

New updates to my Device Models & Subcircuits page.

New updates to my Simulation Tools & Macros page.

With years of benign neglect, I've accumulated more than 600 schematics on my S.E.D/Schematics page. So I'm busy indexing everything...

after more work I'm now up to "O" >:-]

Comments welcome. Also suggestions about what to add. ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

Why not write a book and actually help the next generation (or the one after that)?

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Perhaps introduce Jim to your publisher?

Best regards, Spehro Pefhany

--
"it's the network..."                          "The Journey is the reward" 
speff@interlog.com             Info for manufacturers: http://www.trexon.com 
 Click to see the full signature
Reply to
Spehro Pefhany

As long as he promises to be polite. ;)

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

That's in the plan. ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

I'm only impolite with idiots. Ask around. Engineers under 40 thinks I walk on water. Those over 40 fear I'm after their job... I'm not, I'm only interested in "fun with circuits" >:-] ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

Your publisher can be rude? ;-)

Best regards, Spehro Pefhany

--
"it's the network..."                          "The Journey is the reward" 
speff@interlog.com             Info for manufacturers: http://www.trexon.com 
 Click to see the full signature
Reply to
Spehro Pefhany

The old guy, George Telecki, retired about a year ago. He was great--I'd been working with him since about 1998. I don't know the new person yet.

I have a couple of projects underway, one for a third edition of BEOS, and a small monograph on photon budgets that I may send to SPIE or someplace like that if I ever get it done.

Most of Jim's NDAs must have expired by now, so he could write about probably 90% of the things he's done if he wanted to.

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Yes. I'd like to talk. It's offensive to me to endure certain assholes who are fond of implying I haven't done anything. (But I still need to get many releases... much of what I've done is current technology... I still have patent applications in progress.)

I may be physically old, but I'm certainly not mentally. ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

Permission to publish isn't generally too hard to get, I wouldn't think. Better get started if you're ever going to, though--if your experience is like mine, it'll take you a solid year of writing and calculating, even if you do it really truly full time.

(At IBM in the late 90s, I was blessed with very understanding managers. When I went into my annual performance review for 1998, I somewhat nervously told them that no, I really hadn't done any of what we'd agreed to for that year, but then plunked down a binder containing my nearly completed book manuscript. Not only did I survive, but they gave me a nice raise.)

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Fortunately I now keep copious notes about my designs... provoked by the Chrysler ignition controller fiasco... I looked back at a 40 year old design and couldn't figure out how/why it worked... took me over a week to reconstruct how/why I designed it that way >:-] ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

That's good, but for the book to be useful it should IMO be a bit more than just a Cooks' tour of Jim's designs, laid out for the admiring multitude. ;) That takes a fair amount of work.

Generalizing the design approaches to make the book more of an apprenticeship-in-a-box does the most good, I think. There are lots of books that talk about _what_ people have done, but not so many that talk about _why_, and very few indeed that give much of a clue about which ones to chose for a given problem.

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Actually, I wrote (and presented) a series of seminars for ICE that cover the nuts and bolts of bipolar design. I could modernize something like that. ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

Most of the advanced amplifier books that I know about present things like the f_T doubler as though they sprang from the forehead of Zeus, and then analyze them. Something about all the messing around you have to do in order to come up with a useful new topology would be really useful.

Hollister, which is the best of the bunch, has a sort of iterative progression that I like a lot, but there's something about discovering a new-to-you topology that makes it your own somehow. Increases the confidence level, anyway. I reinvented some of the classical small circuits before I knew that they were classical--I expect that many of us who started out as hobbyists did.

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Greetings Phil, What you said about discovering something new to you makes a lot of sense. Partly because you then understand it. When trying to understand the Heisenberg Uncertainty Principle I thought about it but didn't really get it. But when I thought of a mechanism that illustrated to me how it worked it all clicked. Sometime later I read an article that used the same explanation that I had "invented". I was not surprised of course. Good ideas, because they are good ideas, tend to be discovered by lots of folks. Eric

Reply to
etpm

YAAAAAAYYYYY!

(As long as it doesn't cost as much as Phil's.)

--

Reply in group, but if emailing remove the last word.
Reply to
Tom Del Rosso

Yo' mama.

Books on electronics, even analogue, have a much bigger potential market than optics books. So far I've sold about one copy for every 3 members of the Optical Society, but that's still only about 6000 copies. Getting the same market penetration in the IEEE would be about 140,000 copies.

You have to amortize the cost over significantly smaller print runs. Besides, mine's over 800 pages of small print!

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

Hey! I bought a copy and I'm not even a member of the Optical Society ;-)

I'm somewhat cavalier when it comes to buying books... just one new good idea acquired makes it worth the cost. ...Jim Thompson

--
| James E.Thompson                                 |    mens     | 
| Analog Innovations                               |     et      | 
 Click to see the full signature
Reply to
Jim Thompson

Agreed. Besides, I don't belong to the IEEE any more either.

Cheers

Phil Hobbs

--
Dr Philip C D Hobbs 
Principal Consultant 
 Click to see the full signature
Reply to
Phil Hobbs

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.