- WinXP LED Control Soft/hardware
- 08-31-2007
  Re: WinXP LED Control Soft/hardware
| 911 Was An Insi... | 09-01-2007 |
Please Register and login to reply and use other advanced options
Ok - you all have been putting up with my Snowmobile LED Brake light
project questions and now I have another idea.
With the Mini-ITX form factor I wonder if there are already hard/
software packages out there that can controll 24 seperate LED channels
with each being controlled at 2 or 3 levels ast a rate up to 15 pulses
per second.
Thanks
http://msdn2.microsoft.com/en-us/robotics/default.aspx
- Serail port in winxp
- January 28, 2005, 10:51 am
- New CAN and LIN hardware and Software
- June 2, 2005, 5:36 pm
- Hardware watchdog
- October 1, 2005, 10:57 am
- software to hardware - help
- October 31, 2005, 3:18 pm
- My PC speakers are too soft
- February 11, 2005, 12:13 am
- LM 393 switching soft
- June 4, 2009, 1:56 pm
- LM 393 switching soft
- June 7, 2009, 6:22 am
- Hardware Design Pages
- May 25, 2006, 8:11 pm
- Re: Need Help With PC Hardware Interface Project.
- December 20, 2005, 12:02 pm
- Question about hardware modification
- January 22, 2008, 1:04 am
- xoscope buffer hardware questions
- September 18, 2007, 6:49 am
- Convert demodulation I/Q to soft Data
- August 24, 2005, 10:24 pm
- OT:Incandescent "soft white" bulb coating?
- January 21, 2005, 5:17 pm
- soft switching push pull converter (need help..)
- April 11, 2007, 8:14 am
- Sorting your hardware - req. advice on optimizing space/convenience
- August 21, 2008, 8:50 pm
> project questions and now I have another idea.
> With the Mini-ITX form factor I wonder if there are already hard/
> software packages out there that can controll 24 seperate LED channels
> with each being controlled at 2 or 3 levels ast a rate up to 15 pulses
> per second.
> Thanks