OT: Does This Exist?

I would start with this:

and add a box with the top you want. It adjusts about 18 inches in height, but you might get by with drilling a couple mounting holes to extend the range.

Table size: 27-1/2'' x 17-5/8'' Table height: 8-5/8'' to 26-3/8'' Maximum load capacity: 330 lbs. Weight: 89 lbs. ITEM 43542-1VGA $99.99

--
Service to my country? Been there, Done that, and I\'ve got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

Yes. See

- look under "Material Handling/Lift Tables"

--
Peter Bennett, VE7CEI  
peterbb4 (at) interchange.ubc.ca  
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

Perfect! And not too expensive!

...Jim Thompson

--
|  James E.Thompson, P.E.                           |    mens     |
|  Analog Innovations, Inc.                         |     et      |
|  Analog/Mixed-Signal ASIC\'s and Discrete Systems  |    manus    |
|  Phoenix, Arizona            Voice:(480)460-2350  |             |
|  E-mail Address at Website     Fax:(480)460-2142  |  Brass Rat  |
|       http://www.analog-innovations.com           |    1962     |
             
I love to cook with wine.      Sometimes I even put it in the food.

I finally found their larger model:

1000 LB. CAPACITY HYDRAULIC SCISSOR TABLE CART INCLUDES NONSLIP PROTECTIVE TABLE MAT Move heavy objects to your workbench or truckbed without straining your back. Rugged all steel construction 1000 lb. maxium weight capacity Locking swivel casters Foot-action pump Table dimensions: 32'' L x 19-3/4'' W Table height: 11'' min., 34-1/2'' max. Caster size: 5'' diameter x 2'' W (2 ridgid, 2 swivel) Overall dimensions: 43'' L x 19-3/4'' W x 38-1/4'' H Weight: 180 lbs.

ITEM 93116-1VGA $279.99

--
Service to my country? Been there, Done that, and I\'ve got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

And if you really need the lift height range, part 41145 goes from 13.5 to 50.25", rated at 770 lbs. We use one at work to stack cabinets. Set it at bench height, slide the newly constructed one off the table onto the cart, pump it up or let it down as needed, slide it off onto the stack (these are 20" tall 3' deep 4' wide 300 lb shaker/incubator cabinets that we stack up to 3 high starting 6" off the floor on a base). Sure beats 2 or 3 guys busting our guts to get that top one up in place :-). Normally $290, on sale now for $250. One of the best quality things I've bought at hf.

-- Regards, Carl Ijames carl.ijames at veriz>

I've seen it at the local HF store. Would love to have one, but its way down on the list till the house is paid off. :(

--
Service to my country? Been there, Done that, and I\'ve got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida