Need connections help from diagrams

n't being very forthcoming is that if medusa gets killed doing this--which appears fairly likely--they don't want it to be their fault.

OK. My first assumption is that people mostly know what they are doing. (I could be wrong... :^)

Could we be held liable if he manages to injure himself?

All medusa's post have been deleted from google groups... so I can't look back.. (please don't bother re-posting... I'm not that interested.)

The fewer A-holes on SED the better.

George H.

te:

rote:

'm

( I

stand

t a

ose

s, but

treated

h. As a point of interest I am German.

for entertainment. Sometimes the posters here will use their engineering t alent to help other people solve their problem. That is a bonus not an obl igation. Presentation , just like in real life, tends to be the key to hav ing a post be the object of entertainment or not. Your presentation in the first post was so poor that it made it natural to turn the thread into a j oke

ver land a favor by letting them review your (secret drawings) and spend th eir time to educate you on something you cannot even articulate. All throug h private email.

e.

uld I have ever guessed I would be walking into a site that the regulars su ffer from locker room syndrome and may occasionally talk of electronics. Do n't know how I missed that...my psychic abilities must be off. I'll seek o ut an older group that exhibits courtesy more so than you younger boys. You r group sense of humor and help escapes me.....and who said I wanted charit y? I was willing to pay to that person who helped me. Would you talk this way to your mother?!

type of xray device...really..does that make sense?!

Huh? Why can you only say it a few times? Are you being chased by law enforcement?

And yes I've already stated that I am aware of the dangers of the caps and the coils. I am not a complete novice. In my day part of my lifetime was s pent as a handiman..repairing frigs, washers, dryers, carpentry etc. Yes i have a decent workbench and a DMM, no scope (sadly). I am attempting to te ach myself electronics but right now my health and pockets dictate an urgen cy to make this device. It is of benefit for my health...not by any means m y death. I've used this type of device for about 15 years and I wanted to m ake a better one than the one that broke down on me and I can't afford to b uy a ready made device. I do not identify it because of current rules and r egulatory bodies and google groups are not what you'd call private.

WTF are you talking about?

George H.

rote:

I'm

e ( I

erstand

..

not a

those

ons, but

be treated

uth. As a point of interest I am German.

o for entertainment. Sometimes the posters here will use their engineering talent to help other people solve their problem. That is a bonus not an o bligation. Presentation , just like in real life, tends to be the key to h aving a post be the object of entertainment or not. Your presentation in t he first post was so poor that it made it natural to turn the thread into a joke

never land a favor by letting them review your (secret drawings) and spend their time to educate you on something you cannot even articulate. All thro ugh private email.

ble.

could I have ever guessed I would be walking into a site that the regulars suffer from locker room syndrome and may occasionally talk of electronics. Don't know how I missed that...my psychic abilities must be off. I'll seek out an older group that exhibits courtesy more so than you younger boys. Y our group sense of humor and help escapes me.....and who said I wanted char ity? I was willing to pay to that person who helped me. Would you talk thi s way to your mother?!

e type of xray device...really..does that make sense?!

nd the coils. I am not a complete novice. In my day part of my lifetime was spent as a handiman..repairing frigs, washers, dryers, carpentry etc. Yes i have a decent workbench and a DMM, no scope (sadly). I am attempting to teach myself electronics but right now my health and pockets dictate an urg ency to make this device. It is of benefit for my health...not by any means my death. I've used this type of device for about 15 years and I wanted to make a better one than the one that broke down on me and I can't afford to buy a ready made device. I do not identify it because of current rules and regulatory bodies and google groups are not what you'd call private.

Never mind.. BTW for those that apparently are not so learned...I'm a woman . Breeze up on your Greek mythology.

I don't know. One sort of doubts he/she has enough assets that an overseas lawsuit would be likely. Given the hush-hush nature of the project and the high-energy technology, helping might even violate ITAR, for all I know.

We've had folks post here who really sounded like they were trying to build IEDs. (They might have been trolling, of course, but what's the point?)

But the main issue is not endangering life.

Most of them have been quoted, and they're all still on supernews, eternal-september, and aioe. Usenet providers stopped accepting cancel messages long ago.

Yeah, at least the crazies are sometimes amusing.

Cheers

Phil Hobbs

te:

rote:

'm

( I

stand

t a

ose

s, but

treated

h. As a point of interest I am German.

for entertainment. Sometimes the posters here will use their engineering t alent to help other people solve their problem. That is a bonus not an obl igation. Presentation , just like in real life, tends to be the key to hav ing a post be the object of entertainment or not. Your presentation in the first post was so poor that it made it natural to turn the thread into a j oke

ver land a favor by letting them review your (secret drawings) and spend th eir time to educate you on something you cannot even articulate. All throug h private email.

e.

uld I have ever guessed I would be walking into a site that the regulars su ffer from locker room syndrome and may occasionally talk of electronics. Do n't know how I missed that...my psychic abilities must be off. I'll seek o ut an older group that exhibits courtesy more so than you younger boys. You r group sense of humor and help escapes me.....and who said I wanted charit y? I was willing to pay to that person who helped me. Would you talk this way to your mother?!

type of xray device...really..does that make sense?! And yes I've already stated that I am aware of the dangers of the caps and the coils. I am not a complete novice. In my day part of my lifetime was spent as a handiman..re pairing frigs, washers, dryers, carpentry etc. Yes i have a decent workbenc h and a DMM, no scope (sadly). I am attempting to teach myself electronics but right now my health and pockets dictate an urgency to make this device . It is of benefit for my health...not by any means my death. I've used thi s type of device for about 15 years and I wanted to make a better one than the one that broke down on me and I can't afford to buy a ready made device . I do not identify it because of current rules and regulatory bodies and g oogle groups are not what you'd call private.

This is even worse, that you don't understand that even if you don't intend to make an x-ray device, that is what you are doing. The voltage at the s park plugs is not the inherent danger. I've been zapped by auto ignitions many times, although your device may deliver a more powerful jolt and so be more dangerous.

The issue is the voltage will be 10's of thousands of volts which when appl ied to what you have drawn as an X-ray tube *will* generate X-rays. Heck, in the old days TV picture tube would create X-rays! Not a lot, but kids w ould sit right in front of the picture tube where they would be exposed to nearly all of them emitted.

Do you understand this design is going to create X-rays? Or is the schemat ic wrong and there is no tube as you have drawn it?

Mischaracterising a group on the basis of the behaviour of a few members is the essence of racism. It's as unacceptable as black-face, and for the same reasons.

Enough.

I'm pretty sure we're both the same race, dude. Try again.

Your total lack of humour is confirmed.

Cheers

Phil Hobbs

Whoosh. I wasn't accusing you of being racist, just of displaying the exact underlying behaviour that causes it: "Mischaracterising a group".

It's funny how people who are the butt of offensive jokes don't seem to share the humor.

Hint: your "joke" was actually not funny, except to people also prone to racist behaviour. Exactly like blackface.

My humour is evident to anyone who knows me. But this is not a humorous subject.

CH

So your thoughts about conservatives, religious folks, and people who doubt "The Science Is Settled" climate pronunciamentos are racist then? Sauce for the goose, and all that.

Man, you're really descending into self-caricature. My poking gentle fun at other white guys is suddenly blackface? _Do_ go on.

Oh, it is, it is.

Cheers

Phil Hobbs

So is it an air Ionizer ("negative ion generator")?

own???

e.

For an educated man you seem to be very poor at thinking. It is not prejud iced to consider the qualities of a group that is defined by having that qu ality. If your views are conservative it is not prejudiced to refer to you r as a conservative, merely a description of your beliefs.

You do understand that, no?

Doubling down I see.

se I'm

me ( I

nderstand

ns..

ed

, not a

e those

tions, but

o be treated

couth. As a point of interest I am German.

go for entertainment. Sometimes the posters here will use their engineeri ng talent to help other people solve their problem. That is a bonus not an obligation. Presentation , just like in real life, tends to be the key to having a post be the object of entertainment or not. Your presentation in the first post was so poor that it made it natural to turn the thread into a joke

r never land a favor by letting them review your (secret drawings) and spen d their time to educate you on something you cannot even articulate. All th rough private email.

table.

w could I have ever guessed I would be walking into a site that the regular s suffer from locker room syndrome and may occasionally talk of electronics . Don't know how I missed that...my psychic abilities must be off. I'll se ek out an older group that exhibits courtesy more so than you younger boys. Your group sense of humor and help escapes me.....and who said I wanted ch arity? I was willing to pay to that person who helped me. Would you talk t his way to your mother?!

es

lf

ome type of xray device...really..does that make sense?!

and the coils. I am not a complete novice. In my day part of my lifetime w as spent as a handiman..repairing frigs, washers, dryers, carpentry etc. Ye s i have a decent workbench and a DMM, no scope (sadly). I am attempting t o teach myself electronics but right now my health and pockets dictate an u rgency to make this device. It is of benefit for my health...not by any mea ns my death. I've used this type of device for about 15 years and I wanted to make a better one than the one that broke down on me and I can't afford to buy a ready made device. I do not identify it because of current rules a nd regulatory bodies and google groups are not what you'd call private.

an. Breeze up on your Greek mythology.

Looks down... I'm so happy not to have seen you. :^)

GH

Polish up that shield, man! Watch out, your horse's wing almost clobbered me!

Cheers

Phil Hobbs

g", which is sometimes fun, both for the teaser and the teasee.

Is this 'cause of Phil's Aussie comment?

You can call Phil a Cannuck... they're stuck with prince Harry and wife. :^)

GH (do we need more smiley faces? :^)

rote:

I'm

e ( I

erstand

..

not a

those

ons, but

be treated

uth. As a point of interest I am German.

o for entertainment. Sometimes the posters here will use their engineering talent to help other people solve their problem. That is a bonus not an o bligation. Presentation , just like in real life, tends to be the key to h aving a post be the object of entertainment or not. Your presentation in t he first post was so poor that it made it natural to turn the thread into a joke

never land a favor by letting them review your (secret drawings) and spend their time to educate you on something you cannot even articulate. All thro ugh private email.

ble.

could I have ever guessed I would be walking into a site that the regulars suffer from locker room syndrome and may occasionally talk of electronics. Don't know how I missed that...my psychic abilities must be off. I'll seek out an older group that exhibits courtesy more so than you younger boys. Y our group sense of humor and help escapes me.....and who said I wanted char ity? I was willing to pay to that person who helped me. Would you talk thi s way to your mother?!

ome type of xray device...really..does that make sense?!

ps and the coils. I am not a complete novice. In my day part of my lifetime was spent as a handiman..repairing frigs, washers, dryers, carpentry etc. Yes i have a decent workbench and a DMM, no scope (sadly). I am attempting to teach myself electronics but right now my health and pockets dictate an urgency to make this device. It is of benefit for my health...not by any m eans my death. I've used this type of device for about 15 years and I wante d to make a better one than the one that broke down on me and I can't affor d to buy a ready made device. I do not identify it because of current rules and regulatory bodies and google groups are not what you'd call private.

oman. Breeze up on your Greek mythology.

Huh? That would be easy... but is it illegal in Germany? (or wherever medusa is from.)

George h.

I forgot my mirror. And that's a boom hitting you in the head... "Ready about, coming about... :^)

George H.

That doesn't gybe with my sailing experience. ;)

Cheers

Phil Hobbs

The big rounded thing on the left of your schematic was the symbol used for an x-ray tube, so really, no it doesn't make sense.