Hi All, I am using two bluetooth modules for data communication. The problem is every first data byte needs about 15ms to be received by another side.
DSP A=>UART RX of Bluetooth module A ===> Air 1 byte datum ==> Bluetooth module B==>UART TX of Bluetooth module B=> DSP B
The timing from UART RX of Bluetooth module A to UART TX of Bluetooth module B needs 15ms ~~ my god...
this is a SPP profile, is that correct? I think this is not in the bluetooth spec range, isn't it? I am guessing that is Bluetooth firmware problem.
Best regards, Boki.