Cable connection help needed

What is the camera model number?

Cheers

its a Cameilian 2.5Meg - I have the pin outs for both and have listed them below - Cheers Tony

Connections/pin outs/ins for the Data Translation FG board

The video input connector, J1, on the DT3157 is a SCSI-II 68-pin, subminiature 'D' shell connector that accepts the digital input signals using cables from Data Translation or cables that you design. Figure 7 illustrates the J1 connector pin orientation.

1 Ground 2 AD0 (+) (MSB) 3 AD1 (+) 4 AD2 (+) 5 AD3 (+) 6 AD4 (+) 7 AD5 (+) 8 AD6 (+) 9 AD7 (+) 10 AD8 (+) or BD0 (+) 11 AD9 (+) or BD1 (+) 12 Ground 13 AD10 (+) or BD2 (+) 14 AD11 (+) or BD3 (+) 15 AD12 (+) or BD4 (+) 16 AD13 (+) or BD5 (+) 17 DIG_IO0 18 DIG_IO2 19 AD14 (+) or BD6 (+) 20 AD15 (+) or BD7 (+) (LSB) 21 External Trigger In 22 Reserved 23 Reset Out (+) 24 Frame Enable Out (+) 25 Frame Enable In (+) 26 Line Enable In (+) 27 Line Enable Out (+) 28 Pixel Clock Out (+) 29 Pixel Clock In (+) 30 Expose (+) or SHUT(+) 31 DIG_IO4 32 DIG_IO5 33 DIG_IO6 34 Ground 35 Ground 36 AD0 ( ) (MSB) 37 AD1 ( ) 38 AD2 ( ) 39 AD3 ( ) 40 AD4 ( ) 41 AD5 ( ) 42 AD6 ( ) 43 AD7 ( ) 44 AD8 ( ) or BD0 45 AD9 ( ) or BD1 46 Ground 47 AD10 ( ) or BD2 48 AD11 ( ) or BD3 49 AD12 ( ) or BD4 50 AD13 ( ) or BD5 51 DIG_IO1 52 DIG_IO3 53 AD14 ( ) or BD6 54 AD15 ( ) or BD7 (LSB) 55 Ground 56 Reserved 57 Reset Out ( ) 58 Frame Enable Out ( ) 59 Frame Enable In ( ) 60 Line Enable In ( ) 61 Line Enable Out ( ) 62 Pixel Clock Out ( ) 63 Pixel Clock In ( ) 64 Expose ( ) or SHUT( ) 65 Ground 66 Ground 67 DIG_IO7 68 Ground If needed more data can be got at - Model number is DT3157 for search.

Connections/pin outs/ins for the Amtel camellia 2.5meg Camera

3=2E1 ''DATA AND SYNC'' CONNECTOR 50 points 3M connector. =A8 connector reference :HIROSE DX10A-50S. =A8 mating connector on cable side : HIROSE DX40-50P ; shell : HIROSE DX50-CV1.

Pin n=B0 Signal

1 PCK+ 2 PCK- 3 FEN+ 4 FEN- 5 COLOUR_O2+ (1) 6 COLOUR_O2-(1) 7 PDATA0+ 8 PDATA0- 9 PDATA2+ 10 PDATA2- 11 PDATA4+ 12 PDATA4- 13 PDATA6+ 14 PDATA6- 15 PDATA8+ 16 PDATA8- 17 PDATA10+ 18 PDATA10- 19 GROUND 20 GROUND 21 SHUTTER+ 22 SHUTTER- 23 COLOUR_I1+(1) 24 COLOUR_I1-(1) 25 NC 26 LEN+ 27 LEN- 28 COLOUR_O1+ ( 29 COLOUR_O1-(1) 30 GROUND 31 GROUND 32 PDATA1+ 33 PDATA1- 34 PDATA3+ 35 PDATA3- 36 PDATA5+ 37 PDATA5- 38 PDATA7+ 39 PDATA7- 40 PDATA9+ 41 PDATA9- 42 PDATA11+ 43 PDATA11- 44 NC 45 NC 46 TRIG_ITC+ 47 TRIG_ITC- 48 COLOUR_I2+(1) 49 COLOUR_I2-(1) 50 NC If needed more data can be got at -

Please show us (if you don't have a scanner or digital camera, you can get it scanned at Kinko's and the like) and we'll be more able to assist.

Cheers! Rich

Hi, I have both but what do you want me to show you? - Tony

Ideally, the schematics and operation manual of both devices, so we can figure out which pin should connect to which, or even if it's feasible.

Since you're posting from google, you can't access the binaries, so you'll have to find a website somewhere that lets you upload pictures - most ISPs that I know of come with a few megabytes of webspace; unfortunately, you're kind of on your own as far as finding, and posting to, one of these places.

Thanks, Rich

The whole PDF files are availible on line at :-

use DT3157 for search

Camera - User guide -

Cheers - Tony

its a Cameilian 2.5Meg - I have the pin outs for both and have listed them below - Cheers Tony

Connections/pin outs/ins for the Data Translation FG board

The video input connector, J1, on the DT3157 is a SCSI-II 68-pin, subminiature 'D' shell connector that accepts the digital input signals using cables from Data Translation or cables that you design. Figure 7 illustrates the J1 connector pin orientation.

1 Ground 2 AD0 (+) (MSB) 3 AD1 (+) 4 AD2 (+) 5 AD3 (+) 6 AD4 (+) 7 AD5 (+) 8 AD6 (+) 9 AD7 (+) 10 AD8 (+) or BD0 (+) 11 AD9 (+) or BD1 (+) 12 Ground 13 AD10 (+) or BD2 (+) 14 AD11 (+) or BD3 (+) 15 AD12 (+) or BD4 (+) 16 AD13 (+) or BD5 (+) 17 DIG_IO0 18 DIG_IO2 19 AD14 (+) or BD6 (+) 20 AD15 (+) or BD7 (+) (LSB) 21 External Trigger In 22 Reserved 23 Reset Out (+) 24 Frame Enable Out (+) 25 Frame Enable In (+) 26 Line Enable In (+) 27 Line Enable Out (+) 28 Pixel Clock Out (+) 29 Pixel Clock In (+) 30 Expose (+) or SHUT(+) 31 DIG_IO4 32 DIG_IO5 33 DIG_IO6 34 Ground 35 Ground 36 AD0 ( ) (MSB) 37 AD1 ( ) 38 AD2 ( ) 39 AD3 ( ) 40 AD4 ( ) 41 AD5 ( ) 42 AD6 ( ) 43 AD7 ( ) 44 AD8 ( ) or BD0 45 AD9 ( ) or BD1 46 Ground 47 AD10 ( ) or BD2 48 AD11 ( ) or BD3 49 AD12 ( ) or BD4 50 AD13 ( ) or BD5 51 DIG_IO1 52 DIG_IO3 53 AD14 ( ) or BD6 54 AD15 ( ) or BD7 (LSB) 55 Ground 56 Reserved 57 Reset Out ( ) 58 Frame Enable Out ( ) 59 Frame Enable In ( ) 60 Line Enable In ( ) 61 Line Enable Out ( ) 62 Pixel Clock Out ( ) 63 Pixel Clock In ( ) 64 Expose ( ) or SHUT( ) 65 Ground 66 Ground 67 DIG_IO7 68 Ground If needed more data can be got at - Model number is DT3157 for search.

Connections/pin outs/ins for the Amtel camellia 2.5meg Camera

3.1 ''DATA AND SYNC'' CONNECTOR 50 points 3M connector. ¨ connector reference :HIROSE DX10A-50S. ¨ mating connector on cable side : HIROSE DX40-50P ; shell : HIROSE DX50-CV1.

Pin n° Signal

1 PCK+ 2 PCK- 3 FEN+ 4 FEN- 5 COLOUR_O2+ (1) 6 COLOUR_O2-(1) 7 PDATA0+ 8 PDATA0- 9 PDATA2+ 10 PDATA2- 11 PDATA4+ 12 PDATA4- 13 PDATA6+ 14 PDATA6- 15 PDATA8+ 16 PDATA8- 17 PDATA10+ 18 PDATA10- 19 GROUND 20 GROUND 21 SHUTTER+ 22 SHUTTER- 23 COLOUR_I1+(1) 24 COLOUR_I1-(1) 25 NC 26 LEN+ 27 LEN- 28 COLOUR_O1+ ( 29 COLOUR_O1-(1) 30 GROUND 31 GROUND 32 PDATA1+ 33 PDATA1- 34 PDATA3+ 35 PDATA3- 36 PDATA5+ 37 PDATA5- 38 PDATA7+ 39 PDATA7- 40 PDATA9+ 41 PDATA9- 42 PDATA11+ 43 PDATA11- 44 NC 45 NC 46 TRIG_ITC+ 47 TRIG_ITC- 48 COLOUR_I2+(1) 49 COLOUR_I2-(1) 50 NC If needed more data can be got at -

Is the serial interface a standard text menu system. The data sheet shows no commands.

Cheers

Outback OZ wrote in news: snipped-for-privacy@b40g2000prd.googlegroups.com:

IMO:

FG Cam AD0-11 < PDATA 4-15. You may have to terminate unused data lines. Check The datasheet on the FG board.

Shutter>Trig

Pixel Clock >PCK Freame Enable>FEN Line Enable>LEN

innews: snipped-for-privacy@b40g2000prd.googlegroups.com:

Thanks Guys - That gets me a little closer I think.

Cheers - Tony

Hows this ( sorry for the missing pin nuumber space)...

camelia_25m DT3157 1 PCK+ 29 Pixel Clock In (+) 2 PCK- 63 Pixel Clock In (?) 3 FEN+ 25 Frame Enable In (+) 4 FEN- 59 Frame Enable In (?) 5 COLOUR_O2+ (1) DT3157 is monochrome 6 COLOUR_O2-(1) 7 PDATA0+ 2 AD0 (+) (MSB) 8 PDATA0- 36 AD0 (?) (MSB) 9 PDATA2+ 4 AD2 (+) 10 PDATA2- 38 AD2 (?) 11 PDATA4+ 6 AD4 (+) 12 PDATA4- 40 AD4 (?) 13 PDATA6+ 8 AD6 (+) 14 PDATA6- 42 AD6 (?) 15 PDATA8+ 10 AD8 (+) 16 PDATA8- 44 AD8 (?) 17 PDATA10+ 13 AD10 (+) 18 PDATA10- 47 AD10 (?) 19 GROUND 1 Ground 20 GROUND 35 Ground 21 SHUTTER+ 30 Expose (+) or SHUT(+) Might be TRIG? 22 SHUTTER- 64 Expose (?) or SHUT(?) 23 COLOUR_I1+(1) 24 COLOUR_I1-(1) 25 NC 26 LEN+ 26 Line Enable In (+) 27 LEN- 60 Line Enable In (?) 28 COLOUR_O1+ ( 29 COLOUR_O1-(1) 30 GROUND 12 Ground 31 GROUND 46 Ground 32 PDATA1+ 3 AD1 (+) 33 PDATA1- 37 AD1 (?) 34 PDATA3+ 5 AD3 (+) 35 PDATA3- 39 AD3 (?) 36 PDATA5+ 7 AD5 (+) 37 PDATA5- 41 AD5 (?) 38 PDATA7+ 9 AD7 (+) 39 PDATA7- 43 AD7 (?) 40 PDATA9+ 11 AD9 (+) 41 PDATA9- 45 AD9 (?) 42 PDATA11+ 14 AD11 (+) 43 PDATA11- 48 AD11 (?) 44 NC 45 NC 46 TRIG_ITC+ 47 TRIG_ITC- 48 COLOUR_I2+(1) 49 COLOUR_I2-(1) 50 NC

-

Tony, you may have a serious mismatch. It seems the camera presents a digital data output, with 12-bit LVDS (low-voltage differential signaling), very nice!, but the Data Translation board is an analog-input board, judging from pin names (I wasn't able to find the manual on their site). Your best bet is to get your hands on a proper Camelia FGT board. Happily, digital- input boards are much less expensive than analog ones.

-

And yet still closer - Thanks guys for all your work - Tony

The DT3157 is a digital only board or so the site blurb says????

cheers Tony