Latest threads in Electronic Componentsshow only best voted threads

Subject Author Posted Replies
 
BC MMB0207 0.1% resistors
Does anybody have experience with BC MMB0207 0.1% resistors ? Rapid sell those for a fraction of the price of other 0.1% resistors and I'm wondering what the catch might be. Parameter BC MMB0207 Arcol...
2
2
 
Fet for HF design
I'm looking for a mosfet better than 2SK544 which has high gain (27 dB at 100 Mhz), low noise (NF 1.5 dB at 100 Mhz) and small transfer capacitance (0.035 pF). Any idea ? or a site where I could...
4
4
 
HP transistor 1853-0357 substitute / replacement?
Anyone know of a substitute or replacement for an HP PNP transistor, part number 1853-0357 ? It may be a special version of 1853-0218. How about a substitute or replacement for that one? Thank you!
5
5
 
Anritsu SiteMasters Wanted
Anritsu Sitemasters Wanted email to:
2
2
 
single component signal detector
Given a rotor with 6 magnets of alternating polarity, I need to count the steps as the rotor turns. I've got a coil next to the rotor as a sensor. The question is how to turn the coil signal (current)...
2
2
 
IC Chips For Sale
Item Manufacturer Part Number Date Code Quantity 1 Zilog Z0840004PSC 0117 550 2 Motorola MC68008P8 9620 491 3 No Logo MC68008P8 9124 1857 4 Motorola MC146818P 9604 475 5 Motorola MC146818P 8827 597 6...
4
4
 
Bi-color red/green LEDs
Is it just me, or do most red/green bi-color LEDs seem to have the "red" set at a wavelength that's really more of an orange than a nice, deep, saturated red? I do the usual trick of mixing the two in...
1
1
 
ARINC 628 connectors
Can anyone help me to find a source for these connectors (preferably in Australia). I can get them from Hypertac in the U.S. but if I recall they want >$100 for them. I need a panel mount receptacle...
 
Hall Sensor
Is there a hall sensor sensitive enough to detect the earth's magnetic field. If so please can someone identify it for me.
2
2
 
Contact identification help...
I can't identify a source or name for these brass contact sleeves (I guess that's what they are). They are 1 3/8" long and hold a male size 8 coax contact () in the center. It kinda turns the coax...
 
surge arrester
Does the SDSA 1175 Surge Arrester installation require turning off all of the power? Or, can the SDSA be installed while the power is on? An electrician installed one on our control panel in the...
3
3
 
Mixed Signal Electronics/PCB Design Group on LinkedIn
Everything Involved In Mixed-Signal Electronics Design (Should be an Electronics / Electrical Design Type on Profile) The Analog, Digital, RF, Transmission Lines, Analysis, Verification, Firmware....
 
Sources of aluminum DC blower fans
Hello, I am looking for a 12VDC blower fan that has an aluminum body/case. Most of the ones I've found are black plastic. The size I'm looking for is approx 3" x 3" x 1" thick. If anyone knows of a...
 
Flowmeter
Hi, I'm trying to find a good flowmeter to buy. The specs are like : - P max = 100 bar - Flow max = 6 L/min - T max = 150°C Do you know any brand for a good flow meter ? I'm surfing on internet but I...
 
SAA1251 datasheet?
Has anybody this datasheet to copy? Kindly, EePee.
4
4